Supreme Bonder
Our bonder has been developed to increase the elasticity to your adhesives. The bonder cures from the outside to the inside of the bond, preventing extension turning white from shocking curing. Our bonder is made in accordance with UK cosmetics regulation and is EU compliant. It helps reduce fumes and irritation.
Products details:
- 15ml
- Do not use on client’s skin
- Make in UK
- Must be used at room temperature
Directions:
- Before use, make sure bonder is used at room temperature. Bonder will be viscous when cold and must be warmed to room temperature and mixed prior to use.
- After the lash extension has been applied, you need to wait 2-3 minutes, and then take a micro brush and apply a very small amount of bonder, only at the joint. Please do not soak the lashes.
- And most important step: let the bonder set! Don’t rush to use a fan or nano mister immediately after applying.
Liquid products, inclusive adhesive, bonders and cream based products cannot be returned. If you are not happy with your purchase please contact our customer service via email at admin@envolash.com.au.
MSDS
MSDS |MATERIAL SAFETY DATA SHEET
Section 1 – Chemical Product and Company Identification
|
MSDS NAME COMPANY NAME |
Supreme Bonder ENVOLASH PTY LTD |
|
COMPANY ADDRESS
PHONE |
15 Peerless Court Avondale Heights Victoria 3034 Australia 0415 217 186 |
|
Creation date: 05/01/2023 Product use: Adhesive cure aid |
|
Section 2 – Composition and Ingredient Information
Ingredient Component Name
Humectants(e.g Glycerine) 10%
Emollients e,g, Peg-7 glyceryl cocoate) 5%
Bulking agents (e.g. Sodium polyacrylate) 5%
Additional ingredients (e,g vitamins, proteins, plant extracts 5%
Emulsifying agents (e.g Ethylhexyl stearate) 5%
Thickeners (e.g. Cellulose derivatives) 5%
Preservatives, antimicrobials 1.5%
Aqua Water to 100%
Proprietary blend
Ethanol containing solution
Section 3 – Hazards Identification
|
Hazard Risk Classification
|
Category 2 for skin and eye irritation |
|
Potential Health Effect |
Eye: Causes eye irritation Skin: Causes skin irritation When used properly the product is safe and tolerable in accordance with the legal provisions (Article 3 of the EC Cosmetics Directive.) |
Section 4 – First Aid Measures
|
Inhalation |
Not expected |
|
Eye Contact |
Inadvertent contact with eyes:rinse thoroughly with plenty of lukewarm water immediately;if irritation persists consult ophthalmologist as a precautionary measure
|
|
Skin Contact |
Gently wash with mild soap and water. If irritation occurs, seek medical attention. If clothing is contaminated, remove and wash before reuse
|
|
Ingestion |
Drink plenty of water. Seek medical attention. |
|
|
Inadvertent ingestion of larger amounts, do not induce vomiting. Rinse out of your mouth and drink about one glass of water. Where appropriate, consult the poison control center of the doctor. |
Section 5 – Fire Fighting Measures
|
Specific Hazard |
N/A |
|
Flash Point |
N/A |
|
Hazardous Decomposition Materials |
NA
|
|
Suitable Extinguishing Media |
All common extinguishing agents are suitable
|
|
Protective Equipment |
NA |
Section 6 – Accidental Release Measures
|
Personal Precautions (for non-emergency and emergency responders) |
Wear appropriate protective equipment. Stop leaking if without risk.
|
|
Environmental precautions |
Do not bring it into the eyes. Packaging should be recycled after residual emptying. Filled, unused packages must be disposed of separately in accordance with the waste management directives of the municipality
|
|
Disposal and Clean Up |
In the event of spillage/leakage, mop up the main volume with clots;when larger amounts are involved, dispose of cloths and mopping up material by controlled disposal-risk of fire. Remove rest with plenty of water and common cleaning agent |
Section 7 – Handling and Storage
|
Handling Precautions |
Avoid contact with eyes, skin, and clothing. Keep out of the reach of children Must be used in accordance with manufacturer’s instructions. Observe any warnings on packaging. Store in a cool and dry place (room temperature) Product may be flammable. Do not expose to extreme heat (e.g. sunlight). do not store close tonaked flames or sources of heat or use in direct vicinity. |
|
|
|
Section 8 – Exposure Controls and Personal Protection
|
Exposure Limits |
No limit value which is to be controlled is defined |
|
Personal Protective Equipment Breathing protection |
N/A Not necessary |
|
Hand protection Body protection |
No special protective gloves necessary No special protective measures necessary |
Section 9 – Physical and Chemical Properties
|
Physical State |
Colorless |
|
Odor |
Slight or characteristic |
|
pH |
6.5-7.5 |
|
Boiling Point |
N/A |
|
Flash Point |
N/A |
|
Flammability |
Non-combustible |
|
Evaporation Rate |
N/A |
|
Ignition Temperature |
N/A |
|
Melting/Freezing Point |
N/A |
|
Solubility |
Water Soluble |
|
Vapor Density |
N/A |
|
Vapor Pressure Density |
N/A 0.97-1.01 g/ml |
Section 10 – Stability and Reactivity
|
Reactivity |
Stable under normal conditions. |
|
Stability |
Excess heat, ignition sources, incompatible materials. |
|
Conditions to Avoid |
None in case of correct treatment and storage |
|
Incompatible Materials |
No dangerous reactions known |
|
Hazardous Decomposition Products |
No decomposition if used correctly |
Section 11– Toxicological Information
|
Inhalative Toxicity |
N/A |
|
Skin Irritation |
May cause skin irritation |
|
Eye Irritation |
May cause irritation to eyes |
|
Carcinogenicity |
No data available |
|
Acute Toxicity Mutagenicity, cancerogenic,reproduction toxicity |
No data available Not known |
Section 12– Ecological Information
|
Ecotoxicity |
No data available |
|
Persistence/Degradability |
No data available |
|
Bioaccumulative Potential |
No data available |
|
Mobility in Soil Other |
No data available In the case of appropriate handling and use, no ecological problems are to be expected |
Section 13– Disposal Consideration
Dispose in accordance with applicable regional, national, and local laws and regulations.Packaging which cannot be cleaned has to be disposed in the same way like the substance itself
Section 14– Transport
No dangerous goods according to the transport regulations
Section 15– Regulatory Information
The product is classified according to the EC guidelines and applicable national laws.
Section 16– Other Information
All the information of Material Safety Data Sheet is provided on the basis in good faith, and is believed to be trustworthy but is for reference only. Adhesive is very complicated and the result of it much dependent on the surface material, additive, releasing agents of the substrates and the user's methods. Our company assumes no responsibility for use or reliance upon this information. The users are responsible for selecting the suitability of the products and methods of use.